Quyết định 09/2001/QĐ-BKHCNMT

DECISION No DECISION No. 09/2001/QD-BKHCNMT OF MAY 10, 2001 ISSUING THE VIETNAMESE STANDARDS THE MINISTER OF SCIENCE, TECHNOLOGY AND ENVIRONMENT Pursuant to the Government�s Decree No. 22/CP of May 22, 1993 on the powers and organizational structure of the Minister of Science, Technology and Environment; Pursuant to the Ordinance on Goods Quality of December 24, 1999; At the proposal of General Director of Standardization, Measurement and Quality Control , DECIDES: To issue together with this Decision 26 Vietnamese standards: (the List enclosed herewith). For the Minister of Science, Technology and Environment Vice Minister BUI MANH HAI THE LIST OF VIETNAMESE STANDARDS (Issued together with Decision No. 09/2001/QD-BKHCNMT of May 10, 2001 of the Minister of Science, Technology and Environment) 1. TCVN 256-1: 2001 (ISO 6506-1 : 1999) Metal materials - Brinell hardness test. Part 1: Testing methods 2. TCVN 256-2: 2001 (ISO 6506-2 : 1999) Metal materials - Brinell hardness test. Part 2: Testing and standard adjustment of testing machines 3. TCVN 256-3: 2001 (ISO 6506-3 : 1999) Metal materials - Brinell hardness test. Part 3: Expertising and standard adjustment of standard sheet. 4. TCVN 257-1: 2001 (ISO 6508-1 : 1999) Metal materials - Rockwell hardness test. Part 1: Testing method (grades A , B, C, D, E, F, G, H, K, N, T) 5. TCVN 257-2: 2001 (ISO 6508-2 : 1999) Metal materials - Rockwell hardness test Part 2: Testing and standard adjustment of testing machines (grades A, B, C, D, E, F, G, H, K, N, T) 6. TCVN 257-3 : 2001 (ISO 6508-3 : 1999) Metal materials - Rockwell hardness test Part 3: Standard adjustment of standard sheet (grades A, B, C, D, E, F, G, H, K, N, T) 7. TCVN 4398 : 2001 (ISO 377 : 1991) Steel and steel products - sampling positions, preparation of sample cast and mechanical properties testing sample. 8. TCVN 5756 : 2001 (The 1st control and consideration). Safety helmet for moped and motorcycle riders. 9. TCVN 5801 : 2001 (The 1st control and consideration). Regulations on assignment and river-going ship building. 10. TCVN 6795-1: 2001 (ISO 5832-1 : 1997) Objects for surgical culture and grafting - Metal materials. Part 1 : Pressure processed stainless steel. 11. TCVN 6796 : 2001 (ISO 8828 : 1988) Objects for surgical culture and grafting - guiding the preservation of orthopedics things. 12. TCVN 6797 : 2001 (ISO 9269 : 1988) Objects for surgical culture and grafting - metal bond splint - holes and slots for screws with conical seating surface. 13. TCVN 6798 : 2001 (ISO 5636 : 1988) Objects for surgical culture and grafting - metal bond splint - holes for screws with symmetric thread and sphere-seating surface. 14. TCVN 6799 : 2001 (ISO 8615 : 1991) Objects for surgical culture and grafting - The location details for head of femur in adults. 15. TCVN 6800 : 2001 (ISO 8827 : 1988) Objects for surgical culture and grafting - hooked nail with parallel foot - general requirements. 16. TCVN 6801 : 2001 (ISO 7151 : 1988) Surgery tools - tools with joints not culture and grafting for cut - general requirements and testing methods. 17. TCVN 6802 : 2001 (ISO 9714 -1 : 1991) Orthopedics drilling appliances - drilling bits, taping bits, counterbore 18. TCVN 6803 : 2001 (ISO 8685 : 1992) Aluminum ore- Sampling process. 19. TCVN 6804 : 2001 (ISO 10277 : 1995) Aluminum ore - Methods of experimental checking of the sampling accuracy 20. TCVN 6805 : 2001 (ISO 10226 : 1991) Aluminum ore - Methods of experimental checking of the sampling difference. 21. TCVN 6806 : 2001 (ISO 8558 : 1985) Aluminum ore - Preparing the pre-dried testing sample. 22. TCVN 6807 : 2001 (ISO 8557 : 1985) Aluminum ore - Determining the hygroscopicity of analyzed samples - Quantitative methods 23. TCVN 6808 : 2001 (ISO 9033 : 1989) Aluminum ore - Determining moisture content of ore. 24. TCVN 6809: 2001 Regulations on assignment and produce of anchorage buoys 25. TCVN ISO/IEC 17020 : 2001 (ISO/IEC 17020 : 1998) General standards for activities of expertize organizations. 26. TCVN ISO/IEC 17025 : 2001 (ISO/IEC 17025 : 1999) General requirements on capability of testing and standard adjustment section.-